| |
Engine Cooling Engine Mods |
|
CilGen™ Extreme Heat Coating
Part #
See Chart in
Description
CilGen™ Ceramic based High Heat Coating
Top coat with CermaSeal™ to give a “shiny” and very hard finish
Good thermal barrier
Available in a variety of colors*
Color stable to metal temperatures in excess of 1400f
Durable smooth finish
Good corrosion and chemical resistance
Will air cure, however curing may be accelerated by curing at 200f. Minimum.
For air cure, the temperature must be above 65F for a minimum of 8 hours.
CermaWhite™
Part #
Quart #61032
Gallon #61028
CermaWhite™is a single component ceramic coating system, designed for high temperature applications. CermaWhite™ will impart a smooth chalk white finish to the coated substrate. CermaWhite™ may be applied directly to bare metal. CermaWhite™ is flexible and will not delaminate, yellow, crack or peel when properly applied.
CermaWhite™ is an excellent coating for exhaust systems and will be especially appealing to the nostalgia market where a white painted exhaust is needed for originality. CermaWhite™ creates a very durable finish that makes it ideal for use on side pipes or other exposed exhaust system components. CermaWhite™ requires no baking. CermaWhite™ is retail packaged to allow the Coat-It-Yourself enthusiast to take advantage of this new product.
CERMASEAL™
Part #
Quart #63032
Gallon #63028
CERMASEAL™ is a thin film coating designed to insulate and protect Exhaust system coatings. CERMASEAL™ reduces the oxidation that can occur on highly polished Metallic Ceramic coatings, allowing the bright chrome like finish to last much longer. CERMASEAL™ may also be applied to CermaStainless, CermaWhite, Cermakrome and other Tech Line products.
CERMASEAL™ gives a mild gloss to the coated surface and seals the finished part so that it is resistance to moat chemicals found in an automotive environment. CERMASEAL™ provides a smooth surface, which is easy to clean and resists staining from both fuel and oil. CERMASEAL™ may also be applied to any polished metal and some plastic surfaces. CERMASEAL™ requires no baking. CERMASEAL™ is retail packaged, to allow the Coat-It-Yourself enthusiast to take advantage of this new product.
TURBO X ™
Extreme temperature Exhaust system coating designed specifically for Turbo’s.
Available in BLACK and BLUE
Reduces under hood temperatures, reduces exhaust manifold surface temperatures
Improve exhaust gas velocity, increase H.P.
Available in 8 OZ. (Retail Packaged) Quart, Gallon
Air drying requires no baking
Cermakrome™ (MCX)
Part #
MCX
Quart 1732
Gallon 1728
MCXLH
Quart 1742
Gallon 1748
Ceramic Chrome-Like Coating. (Once Polished)
6 OZ.
Quarts
Gallons
Available in a special formulation for low humidity environments (MCXLH)
|
|
|
|
|
